Home
 > Fabrication
 > AMS Mitsubishi Lancer Evolution VIII/IX 2.0L Crate Motor
 > Stoptech Street Performance Front Brake Pads
 > Stoptech Street Performance Rear Brake Pads
 > DBA 4000 Series Rear Brake Rotors
 > ETS Mini Batter Kit
 > ETS Single Tip Exhaust
 > ETS V2 Exhaust
 > ETS V2 Extreme Exhaust
 > AMSOIL Synthetic Premium Engine Oil, 10W 40
 > AMSOIL Signature Series Synthetic Engine Oil, 5W 30
 > AMSOIL Z-Rod Synthetic Motor Oil, 10W 30
 > AMSOIL Severe Gear Oil 75W 90
 > AMSOIL Dominator Coolant Booster
 > AMSOIL Engine Anti-Freeze and Coolant
 > NGK Laser Iridium Spark Plugs, Lancer Evolution 8
 > Synapse Synchronic Diverter Valve
 > Synapse Engineering Upper Intercooler Pipe
 > AMS Performance Mini battery Kit
 > CST Coilovers
 > HKS Hi Power Exhaust
 > HKS Legamax Premium Exhaust
 > HKS Hipermax III Coilovers
 > KW Variant 3 Coilovers
 > Tein Super Street Coilovers
 > Cosworth M2 Camshafts, Lancer Evolution 8
 > ACT HD Clutch Kit,Porsche 964, 993, 996, 997
 > FFTEC Motorsports V3 Intake Manifold
 > AEM Air Intake
 > Sparktech Non CDI Coil On Plug Ignition, Lancer Evolution 8
 > Sparktech CDI Coil On Plug Ignition, Lancer Evolution 8
 > Sparktech Non CDI Coil On Plug Ignition, Lancer Evolution 9
 > Eibach Pro-Kit Lowering Springs
 > Kelford 264/252 Camshafts, Lancer Evolution X, Lancer Ralliart
 > Kelford 270/260 Camshafts, Lancer Evolution X and Lancer Ralliart
 > DC Sports Twin Tip Cat Back Exhaust
 > DC Sports Single Tip Cat Back Exhaust
 > Apex'I Hybrid Megaphone Exhaust
 > 

GSC S1 Camshafts, Lancer Evolution X and Lancer Ralliart

Categories

BMW
Mitsubishi Lancer Evolution IV-IX
Mitsubishi Lancer Evolution X
Mitsubishi Lancer Ralliart
Porsche
Subaru
Nissan GTR

Store
Continue Shopping

GSC S1 Camshafts, Lancer Evolution X and Lancer Ralliart

GSC S1 Camshafts, Lancer Evolution X and Lancer Ralliart
Qty:
Price:$599.25


The GSC Power-Division S1 cams for the Mitsu Evolution X are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in. 

  • Designed for a rev range of 3000-7500rpms
  • the S1 cams work well on the stock valve springs.
 
6010S1 ADV Duration Duration @ 1mm     Peak Lift
Intake 264 220     10.20mm
Exhaust 264 216     10.00mm